Trusonic ultrasonic

dB increment

Alarm

You can adjust the display range if your measurement in range.

The coarse adjustment from 25, 50, 100, 200, 400, 800, 1600, 3200, 6000 mm. Press the RANGE right again from 50 change to 100,etc. one time change from 25 change to 50, press

هر زمان با فشردن کلید سمت چپ ( منظور enter یا ↲ ) رنج مشاهده شده به 25 میلیمتر برخواهد گشت 

Any time when press the left side ( ↲ ) key,   the range display will return back to the 25 mm, user can press range set another display range .

DAMPING (Probe Matching)

This function serves for matching the probe. You can use it to adjust the damping of the probe’s oscillating circuit and consequently change the height, width and resolution of the echo display

- Low ( 200Ω), this setting has a lower damping effect and produces higher and broader echoes
- High (100Ω), this setting reduces the echo height but mostly also produces narrow echoes with higher resolution
- Select the function DAMP,

- Set the required value by means of ( Down/Up arrow )  key to the right value.